This website or its third party tools use cookies, which are necessary to its functioning and required to achieve the purposes illustrated in the cookie policy. If you want to know more or withdraw your consent to all or some of the cookies, please refer to the cookie policy. By closing this banner, scrolling this page, clicking a link or continuing to browse otherwise, you agree to the use of cookies..

Universal interface CC2 (2 IN / 2 OUT)

Universal interface CC2 (2 IN / 2 OUT)
KNX bus device functioning as 2-channel input for the connection of potential-free contacts and 2-channel output for control of low-consumption LED. Mounting in wall box or on 35 mm rail (EN 60715) with the support EK-SMG-35 (to be ordered separately). Power supply via bus. Bus terminal block included in the delivery. To be used in KNX installations for home and building automation.
• ON/OFF switching of single loads or group of loads
• dimming of lighting devices
• operating of shutters and roller blinds
• detecting the state of signaling contacts (from safety devices, alarms, etc.)
• recalling and saving of scenes
• sending on the bus of values (temperature, brightness, etc.)
• switching to forced functioning (lock)
• counting of impulses and switching cycles

• controlling of low-consumption LED to be used as state feedback, orientation nightlights, etc.
A detailed description of the parameters can be found in the application manual of the device. Configuration and commissioning require ETS4 2.0 or later versions. ETS application program: APEKCC2TP##.knxprod (## = release). Available languages: English, French, German, Italian