KNX Room temperature controllers

The ekinex® range of room thermostats and related accessories gives the possibility to realize numerous variations in order to fulfil the most different needs. The thermostats of the FF series (EP2 and EQ2 with relative humidity sensor) are provided with 2 inputs configurable as analog or digital and a backlighted LCD-display; each one is equipped with an integrated KNX communication module. Each thermostat has integrated LEDs (blue/green or white/red) that can be freely programmed (e.g. to indicate a status or for night lighting). The thermostats of the 71 series is (E72-TP for flush mounting on a round or square box) and E72-TP-R (for flush mounting on a rectangular box) are provided with a backlighted LCD-display. The universal interface EK-CG2-TP is provided with the thermostat function independently for its 4 channels; the universal interface EK-CE2-TP is provided with 1 channel configurable as room thermostat. The ekinex offer includes also NTC temperature probes 10 kΩ at 25 ° C for outdoor installation, immersion in piping, contact or air mass measurement.

Filter:

KNX Room temperature controllers

Easy room temperature controller ER2

Easy room temperature controller with backlighted LCD

Room temperature controller EP2

Room temperature controller with backlighted LCD

Room temperature controller EQ2

Room temperature controller with backlighted LC-display and relative humidity integrated sensor

Room temperature controller 71 series

Room temperature controller 71 series with backlighted LC-display

Room temperature controller 71 series for rectangular wall box

Room temperature controller 71 series with backlighted LC-display for mounting on rectangular wall box

Temperature sensor for outdoor installation

Outdoor temperature sensor with NTC sensing element to be used in combination with ekinex® KNX thermoregulation devices

Temperature sensor for immersion in piping

Temperature sensor for immersion in piping with NTC sensing element to be used in combination with ekinex® KNX thermoregulation devices

Temperature sensor for contact measurement

Temperature sensor for contact measurement with NTC sensing element to be used in combination with ekinex® KNX thermoregulation devices

Temperature sensor for air mass measurement

Temperature sensor for air mass measurement with NTC sensing element to be used in combination with ekinex® KNX thermoregulation devices

Universal interface CG2 (4 IN conf. as DI or NTC / 4 OUT) with thermostat function

KNX device for connecting free-potential contacts or NTC temperature sensors (to the inputs) and low-consumption LED (to the outputs). Room thermostat function for 4 independent zones

Universal interface CE2 (4 IN conf. / 2 OUT relais 5A)

KNX device for connecting free-potential contacts (input) and electrical loads (output). 1 input configurable for NTC (10 kΩ a 25°C) temperature probe with thermostat function

Multisensor T - R.H. - CO2 eq.

KNX sensor and regulator for temperature, relative humidity and CO2 equivalent.

Multisensor T - U.R. - CO2 eq. for rectangular box

KNX sensor and regulator for temperature, relative humidity and CO2 equivalent.

Air quality multisensor and regulator

KNX multisensor and regulator for temperature, relative humidity, TVOC (Total Volatile Organic Compounds) and CO2 equivalent.

Air quality multisensor and regulator for rectangular box

KNX multisensor and regulator for temperature, relative humidity, TVOC (Total Volatile Organic Compounds) and CO2 equivalent.