Notice
This website or its third party tools use cookies, which are necessary to its functioning and required to achieve the purposes illustrated in the cookie policy. If you want to know more or withdraw your consent to all or some of the cookies, please refer to the cookie policy. By closing this banner, scrolling this page, clicking a link or continuing to browse otherwise, you agree to the use of cookies..

CoolMasterNet with integrated KNX module

CoolMasterNet with integrated KNX module
ORDERING CODE
EK-BQ1-TP
DESCRIPTION
CoolMasterNet ekinex® is a plug and play interface for bidirectional data exchange between the KNX home automation system and the bus communication system dedicated to air conditioning through VRV / VRF and splits. The device allows the KNX system to individually monitor and control all the units connected to the bus system dedicated to air conditioning. The LCD touch-screen also allows the direct control of every unit. Among the available controls* there are:

- on/off
- mode (Cool, Heat, Auto, Fan)
- fan speed
- temperature setpoint
- room temperature feedback
- error code

The dedicated CoolRemote App allows the remote login via web through smartphone, tablet or PC to verify the status of the system and possible error codes (where available) and perform basic controls such as on/off (individual or collective), setup of the temperature setpoint, selection of the operating mode and fan speed. The device is equipped with communication lines for the following manufacturers: Mitsubishi Electric, Daikin, Toshiba, Panasonic, Sanyo, Hitachi, Mitsubishi Heavy Industries, LG, Samsung, and Gree. The device integrates a KNX bus communication module and is realized for wall-mounting. The device is powered by a SELV 12-24 Vdc voltage.

*) Some control options may be limited by manufacturers.
FUNCTIONS / CHARACTERISTICS
• Plastic material
• Colour LCD touch-screen display
• Green (on/off connection) and orange (Tx/Rx indication LED)
• Connection to bus line with KNX terminal block
• RS232 (ASCII), RS485 (Modbus RTU), Ethernet (ASCII, Modbus IP), mini USB (maintenance) ports
• Wall-mounting

KNX-MODULE
• Pre-installed in factory
• Activated through assignment of L3 communication line
• 128 default group addresses (expandable to 1.024)
CONFIGURATION AND COMMISSIONING
Configuration and commissioning by means of application program Quickinstall