Notice
This website or its third party tools use cookies, which are necessary to its functioning and required to achieve the purposes illustrated in the cookie policy. If you want to know more or withdraw your consent to all or some of the cookies, please refer to the cookie policy. By closing this banner, scrolling this page, clicking a link or continuing to browse otherwise, you agree to the use of cookies..

Mixing group controller

Mixing group controller
ORDERING CODE
EK-HH1-TP
DESCRIPTION

KNX bus device for the control of a mixing group. Control of a servomotor for mixing valve (3 floating points or with 0-10 V signal). Control of a circulating pump. Acquisition of inflow and return temperatures (conveying fluid) and external temperature (air). Regulation of the inflow temperature of the conveying fluid with regulation modes selectable separately for heating and cooling. Device particularly suitable for underfloor or ceiling heating and cooling radiant panels applications in combination with room thermostats with integrated temperature and humidity sensor. Mounting in distribution board on EN 60715 rail (8 modular units, each 18 mm). To be used in KNX installations for home and building automation.

FUNCTIONS / CHARACTERISTICS
OUTPUTS
• 1 TRIAC output (CLOSE / COM / OPEN) for 3-floating point servomotor (with POWER AUX input for servomotor power supply at 24 Vac or 230 Vac)
• 1 output (AO1) for servomotor with 0-10 V control signal
• 1 SPST relay output (DO1) for circulating pump control
• 2 SPST relay outputs (DO2, DO3) for additional functions

INPUTS
• 3 analogic inputs (IN1, IN2, IN3) for passive temperature sensors (NTC 10 kΩ at 25 °C)
• 2 configurable inputs (IN4, IN5) as analogic (for passive temperature sensors NTC 10 kΩ at 25 °C) or digital (for free-potential contacts)

OTHER CHARACTERISTICS
• Power supply from bus and auxiliary 230 Vac 50/60 Hz power supply
• Two logic functions with 16 objects each
• Overtemperature (heating) and undertemperature (cooling) alarm management
• Alarm management by condensation sensor
• Alphanumeric display and membrane keyboard for monitoring of operating parameters and modification of a control parameters subset

CONFIGURATION AND COMMISSIONING
A detailed description of the parameters can be found in the application manual of the device. Configuration and commissioning require ETS4 or later versions. ETS application program: APEKHH1TP##.knxprod (## = release). Available languages: English, French, German, Italian