Notice
This website or its third party tools use cookies, which are necessary to its functioning and required to achieve the purposes illustrated in the cookie policy. If you want to know more or withdraw your consent to all or some of the cookies, please refer to the cookie policy. By closing this banner, scrolling this page, clicking a link or continuing to browse otherwise, you agree to the use of cookies..

Fancoil controller 0-10 V

Fancoil controller 0-10 V
ORDERING CODE
EK-HB1-TP
DESCRIPTION

KNX bus device with actuator function (in combination with a KNX room temperature controller) or controller / actuator (with acquisition of the temperature value by KNX sensor or by a sensor connected to an analog input). For installations in 2-pipe hydraulic distribution systems with ON / OFF control of an electrothermal actuator on a shut-off valve and 0-10 V control of a fan with brushless motor. The outputs not used for controlling a fan coil unit can be configured as output channels to carry out other applications. Mounting in distribution board on EN 60715 rail (4 modular units, each 18 mm). To be used in KNX installations for home and building automation.

FUNCTIONS / CHARACTERISTICS
• Power supply from the bus and auxiliary power supply 230 Vac 50/60 Hz
• Control of 2-pipe hydraulic distribution systems with shutoff valve ON/OFF (1 SPST relay)
• 1 output 0-10 V for control of a fan with brushless motor
• 2 inputs freely configurable for acquisition of passive temperature sensors (10 kΩ NTC at 25°C) or as potential-free binary inputs
CONFIGURATION AND COMMISSIONING
A detailed description of the parameters can be found in the application manual of the device. Configuration and commissioning require ETS4 or later versions. ETS application program: APEKHB1TP##.knxprod (## = release). Available languages: English, French, German, Italian